(1) brand new 75 horse power shearpin gearbox. This gearbox fits several different makes of 5',6' and some 7' rotary cutters.
Here are the specs on the box:
*75 horse power gearbox
*Standard 1-3/8" smooth input shaft(where the pto shaft hooks on). The pto shaft is held on by a 1/2 shearbolt.
*length of the input shaft out of the gearbox is 3-3/4" long X 1-3/8" smooth"
*bolt hole pattern for mounting is a diamond shape- hole directly under the input shaft then around the box, 5-5/8" center of hole to center of hole. It takes 4 of a 3/4" bolt
for mounting the box to the deck.
*15 splined 2" output shaft(where the blade carrier hooks up on the bottom)
The ouput shaft is 2-3/4" from the bottom of the box to the end of the 15 splines. There is 2" of a 1" thread after that. This makes the output shafts complete length 4-3/4" long.
*takes a 1" threaded castle nut and a carter key on the bottom of the output shaft to secure blade pan(which is included)
*overall height of the box from the top of the mower deck to the top of the box is 11"
This is a heavy item (72 lbs.) so freight is not cheap, but we do not make anything off of freight, whatever ups charges us we charge you.
75 HP 1-3/8" Smooth Input Shaft with Shearpin
2" 15 Splin Output Shaft Bolt Pattern: 8" (4) 3/4" Holes
Center Hole for Shaft Assembly needed - 5-1/2"
1:1:46 Ratio
The Input and Output Shafts Cannot be Purchased Serparately.
They are Sold as a kit.
The kit includes the following parts: input shaft, input gear, output shaft, output gear.
The Shaft Kit Cannot Be Separated.
