Heavy duty series 6 pto shaft, triangular tubing. Rated for tractors up to 64 hp running a 540rpm, 100 hp if runing 1000rpm.
*1-3/8" 6 spline (standard 540 on tractors) on the tractor end
*1-3/4" 20 spline on the implement end w/ a 4 disc slip clutch adjusted from spring tension, help on by a wedge bolt on the side fo the yoke(look at pictures)
* You can see in the second picture of the 20 splined hub, this is the same shaft as the other I have with the 6 splines but I buy a 20 splined hub and insert it in the shaft to make it work cutters with 20 splined input shafts on there gearboxes. That is why this shaft is more expensive.
*collapsed length(from end of the shaft to end of shaft when closed) 55.2"
*fully extended length (stretched as far as it can) 84.1"
*Maximum useable length is 74.5" (this leaves 1/3 of the tube inside itself which is recommended)
Remember the shaft can always be cut down if it is to long, just take the same amount off of each side fo the tube. This can be done with a hack saw.
This is a heavy item and shipping is expensive. We do not make anything off of shipping, if you feel it is high please contact me and I will double check with my UPS system here to make sure that is has calculated correctly. Also, if you are buying multilple purchases please allow me to combine shipping and invoice you.
